Hooks

3.25T Blue Pin Shackle

These blue pin Shackles are hot dipped galvanised unlike many of the cheaper versions available these will not rust. Comes with embossed markings.

A general purpose shackle used for attaching tow ropes, strops and winch hooks etc.

This is an essential item for recovery vehicles and 4×4 / off-road vehicles where we recommend that you would always have a few of these shackles included inside every vehicles recovery kit.

Dimensions:

  • Overall Size = 105mm x 75mm
  • Throat Opening = 27mm
  • Pin Diameter = 18mm
  • Internal Bow Width = 40mm
  • Internal Bow Height = 55mm
  • Rated at 3.25 tonnes WLL (working load limit)

CTA-Comanda


4 Ton Pulley Block

This heavy duty 4 ton pulley block is suitable for both steel and synthetic* ropes up to 7mm.

The main body is coated with a tough powder coated finish and the roller is finished with a durable zinc/galvanised finish.

This is a great piece of equipment for use by ATV and small 4×4’s.

A very important piece of equipment for anyone taking a vehicle off road.

Dimensions:

  • Overall Size = 145mm x 78mm x 25mm
  • Hole Size = 38mm
  • Roller Size = 65mm
  • Pin Size = 14mm
  • Maximum Capacity 4000 kg

CTA-Comanda


4.75T Blue Pin Shackle

These blue pin Shackles are hot dipped galvanised unlike many of the cheaper versions available these will not rust. Comes with embossed markings.

A general purpose shackle used for attaching tow ropes, strops and winch hooks etc.

This is an essential item for recovery vehicles and 4×4 / off-road vehicles where we recommend that you would always have a few of these shackles included inside every vehicles recovery kit.

Dimensions:

  • Overall Size = 125mm x 90mm
  • Throat Opening = 32mm
  • Pin Diameter = 22mm
  • Internal Bow Width = 50mm
  • Internal Dow Height = 70mm
  • Rated at 4.75 tonnes WLL (working load limit)

CTA-Comanda


8 Ton Pulley Block

This heavy duty 8 ton pulley block is suitable for both steel and synthetic* ropes up to 14mm.

It comes complete with a grease nipple allowing continued free running of the pulley wheel.

The main body is coated with a tough powder coated finish and the roller is finished with a durable zinc/galvanised finish.

This is a great piece of equipment for use by 4×4 and recovery truck winches.

A very important piece of equipment for anyone taking a vehicle off road.

Dimensions:

  • Overall Size = 130mm x 250mm x 40mm
  • Hole Size = 75mm
  • Roller Size = 100mm x 21mm
  • Pin Size = 27mm
  • Maximum Capacity 8000 kg

CTA-Comanda


Galvanised Thimbles

Note: We can provide the other versions on demande.For availability and prices please contact us.

  • Thimble for 6mm rope.
  • Thimble for 10mm rope.
  • Thimble for 12mm rope.

.


CTA-Comanda


Hook & Release Pin

1/4 Steel Hook
.
.
.
.
.


CTA-Comanda


Sling Hooks

1 Ton Eye Hook (red)

Note: We can provide the other versions on demande.For availability and prices please contact us.

  • 1 Ton Eye Hook (red).
  • G80 Sling Hook & safety catch. (yellow).

CTA-Comanda


Follow us: