Shock absorbers

0001505_bilstein-by-mudster-shock-absorbers-2017-version-set-of-4_550Bilstein by Mudster shock absorbers 2017 version, set of 4

    • Compatible with any Dacia/Renault Duster 4×4 2010+.
    • The only lifting shock absorbers in the market perfectly adapted for both petrol and Diesel engine Dusters!
    • Provides 35 mm of lift in conjunction with the standard , OEM springs.
    • Corrects the camber angles (no camber correction kits required).
    • The engine and gearbox lowering kit is not required for this shock absorber model, but we recommend it for a more pleasant experience after lifting the suspension.
    • The shock absorber’s tube is double reinforced in order to prevent it’s bending when abused during hard offroading.
    • The spring support is reinforced.
    • The sway bar link’s mount points are relocated in order to prevent the link’s bending during offroading.
    • 24 month warranty with unlimited kilometers, with a lifetime of 80,000 km.

    NOTE : This kit IS NOT COMPATIBLE WITH THE LIFT SPRINGS ( ANY LIFT SPRING MODELS ).

    Please keep in mind the following recommendations in order to enjoy a long time and in the best possible conditions of your suspension:

    1. Periodically check the condition of the shock absorber rods on each machine revision (we recommend that you check for each periodic maintenance operation such as oil changes and filters). If they show cracks, cuts, gaps between the sleeve and the shock absorber, we recommend that you replace them as soon as possible. If they are not in good condition (they have cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers will suffer damage, this type of defect not being the subject of the warranty.

    2. Periodically check the tire pressure! We recommend that it be between 1.8 and 2 (1.8 for comfort, 2 for running in highway conditions).

    3. Adjust the machine geometry (angles – especially convergence, but also drop and escape angles), after approx. 500-1000 km from suspension installation!


CTA-Comanda


0000692_bilstein-by-mudster-shock-absorbers-set-of-4_550Bilstein by Mudster shock absorbers,set of 4

    • Compatible with Dacia Duster 4×4 2010+, 1.5 diesel and 2.0 petrol. Compatible with 1.6 petrol only if the car has a front weight, eg: winch, metal bar!
    • Provides + 4,5cm to 5,5cm of lift depending on the type of springs used.
    • Offering a superior road behavior to any other type of shock absorber for Dacia Duster even in competitions.
    • Provides unrivaled reliability with the highest quality materials used, applied anti-corrosion protection as well as reinforcement of the tube and spring support.
    • They are the only shock absorbers for Dacia Duster in the market that use the interior spring to stop end of stroke.
    • Corrects camber angle (no camber correction kits required ).
    • The position of the anti roll bar links mount point is adjusted, so lower swingarm will not damage the links when the wheel is in it’s lower position.
    • Compatible with H & R springs +3 cm, Eibach springs +3 cm as well as any other 2.5-3.5 cm lift springs for Dacia Duster.
    • 24 month warranty with unlimited kilometers, with a lifetime of 80,000 km.

    Please keep in mind the following recommendations in order to enjoy a long time and in the best possible conditions of your suspension:

    1. Periodically check the condition of the shock absorber rods on each machine revision (we recommend that you check for each periodic maintenance operation such as oil changes and filters). If they show cracks, cuts, gaps between the sleeve and the shock absorber, we recommend that you replace them as soon as possible. If they are not in good condition (they have cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers will suffer damage, this type of defect not being the subject of the warranty.

    2. Periodically check the tire pressure! We recommend that it be between 1.8 and 2 (1.8 for comfort, 2 for running in highway conditions).

    3. Adjust the machine geometry (angles – especially convergence, but also drop and escape angles), after approx. 500-1000 km from suspension installation!


CTA-Comanda


Koni Heavy Track shock absorbers, set of 4

Koni Heavy Track shock absorbers are adjustable and can be set depending on the type of use. They can be considered “all-terrain” shock absorbers.

Intended for daily use, both on-road and off-road, providing comfort on rolling but also firmness in approaching corners.

They have a solid construction and are made of the best materials, thus offering a guaranteed quality. It is easily fixed in place of the original shock absorbers, without the need for adjustments.

They are designed to work only with OEM springs.

Setting:

www.koni.de/pkw/technologie/daempfer-nachstellung/


CTA-Comanda


Follow us: