Suspensions

0000689_bilstein-by-mudster-hr-suspension-complete-set-5cm_550 Bilstein by Mudster – H&R suspension complete set +5cm

    • Compatible with Dacia Duster 4×4 2010+, 1.5 diesel and 2.0 petrol. Compatible with 1.6 petrol only if the car has a front weight, eg: winch, metal bar!
    • Provides lift of + 5cm compared tu the standard Duster suspension
    • Offering a superior road behavior to any other type of shock absorber for Dacia Duster even in competitions.
    • Provides unrivaled reliability with the highest quality materials used, applied anti-corrosion protection as well as reinforcement of the tube and spring support.
    • They are the only shock absorbers for Dacia Duster in the market that use the interior spring to stop end of stroke.
    • Corrects camber angle (no camber correction kits required ).
    • The position of the anti roll bar links mount point is adjusted, so lower swingarm will not damage the links when the wheel is in it’s lower position.
    • 24 month warranty with unlimited kilometers Bilstein-Mudster shock absorbers, with a lifetime of 80,000 km.
    • 12 months warranty for H & R springs.

    Please keep in mind the following recommendations in order to enjoy a long time and in the best possible conditions of your suspension:

    1. Periodically check the condition of the shock absorber rods on each machine revision (we recommend that you check for each periodic maintenance operation such as oil changes and filters). If they show cracks, cuts, gaps between the sleeve and the shock absorber, we recommend that you replace them as soon as possible. If they are not in good condition (they have cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers will suffer damage, this type of defect not being the subject of the warranty.

    2. Periodically check the tire pressure! We recommend that it be between 1.8 and 2 (1.8 for comfort, 2 for running in highway conditions).

    3. Adjust the machine geometry (angles – especially convergence, but also drop and escape angles), after approx. 500-1000 km from suspension installation!


CTA-Comanda


0000688_bilstein-by-mudster-ironman-suspension-complete-set-55cm_550 Bilstein by Mudster – Pedders suspension complete set +5,5cm

    • Compatible with Dacia Duster 4×4 2010+, 1.5 diesel and 2.0 petrol. Compatible with 1.6 petrol only if the car has a front weight, eg: winch, metal bar!
    • Provides lift of + 5,5cm compared tu the standard Duster suspension
    • Offering a superior road behavior to any other type of shock absorber for Dacia Duster even in competitions.
    • Provides unrivaled reliability with the highest quality materials used, applied anti-corrosion protection as well as reinforcement of the tube and spring support.
    • They are the only shock absorbers for Dacia Duster in the market that use the interior spring to stop end of stroke.
    • Corrects camber angle (no camber correction kits required ).
    • The position of the anti roll bar links mount point is adjusted, so lower swingarm will not damage the links when the wheel is in it’s lower position.
    • 24 month warranty with unlimited kilometers Bilstein-Mudster shock absorbers, with a lifetime of 80,000 km.
    • 12 months warranty for Pedders springs.

    Please keep in mind the following recommendations in order to enjoy a long time and in the best possible conditions of your suspension:

    1. Periodically check the condition of the shock absorber rods on each machine revision (we recommend that you check for each periodic maintenance operation such as oil changes and filters). If they show cracks, cuts, gaps between the sleeve and the shock absorber, we recommend that you replace them as soon as possible. If they are not in good condition (they have cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers will suffer damage, this type of defect not being the subject of the warranty.

    2. Periodically check the tire pressure! We recommend that it be between 1.8 and 2 (1.8 for comfort, 2 for running in highway conditions).

    3. Adjust the machine geometry (angles – especially convergence, but also drop and escape angles), after approx. 500-1000 km from suspension installation!


CTA-Comanda


0001391_lowering-kit-for-engine-and-gearbox_550 Lowering kit for engine and gearbox

This product is sold with the kit suspension only.

  • It lowers the engine and the gearbox with 1.5 cm to compensate for suspension’s lift effects.
  • The spacers are made of stainless steel.
  • The bolts replace the original ones and they are made out of special steel hardness.
  • It doesn’t change car’s ground clearance.
  • It does not affect in any way the 5cm lift gain with the suspension lift kits
  • It lowers the engine and the gearbox in the limit allowed by the engine shield, leaving enough room between the shield and the sump
  • It does not modify in any way the engine shield position.

blank


CTA-Comanda


Pedders suspension complete set +3cm

    • Compatible with Dacia Duster 4×4 2010+, 1.5 diesel and 2.0 petrol. Compatible with 1.6 petrol only if the car has a front weight, eg: winch, metal bar!
    • Suspension set consisting in 4 shock absorbers, 4 springs and adjusting screws.
    • Provides a lift of approx. 3 cm from the standard suspension of the car.
    • The shock absorbers have a robust construction with a larger body diameter and longer strut, with dust protection.

    Please keep in mind the following recommendations in order to enjoy a long time and in the best possible conditions of your suspension:

    1. Periodically check the condition of the shock absorber rods on each machine revision (we recommend that you check for each periodic maintenance operation such as oil changes and filters). If they show cracks, cuts, gaps between the sleeve and the shock absorber, we recommend that you replace them as soon as possible. If they are not in good condition (they have cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers will suffer damage, this type of defect not being the subject of the warranty.

    2. Periodically check the tire pressure! We recommend that it be between 1.8 and 2 (1.8 for comfort, 2 for running in highway conditions).

    3. Adjust the machine geometry (angles – especially convergence, but also drop and escape angles), after approx. 500-1000 km from suspension installation!


CTA-Comanda


Pedders suspension complete set +4cm (comfort)

    • Compatible with Dacia Duster 4×4 2010+, 1.5 diesel and 2.0 petrol. Compatible with 1.6 petrol only if the car has a front weight, eg: winch, metal bar!
    • Suspension set consisting in 4 shock absorbers, 4 springs and adjusting screws.
    • Provides a lift of approx. 4 cm from the standard suspension of the car.
    • The shock absorbers have a robust construction with a larger body diameter and 3 cm longer strut, with dust protection.

    Please keep in mind the following recommendations in order to enjoy a long time and in the best possible conditions of your suspension:

    1. Periodically check the condition of the shock absorber rods on each machine revision (we recommend that you check for each periodic maintenance operation such as oil changes and filters). If they show cracks, cuts, gaps between the sleeve and the shock absorber, we recommend that you replace them as soon as possible. If they are not in good condition (they have cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers will suffer damage, this type of defect not being the subject of the warranty.

    2. Periodically check the tire pressure! We recommend that it be between 1.8 and 2 (1.8 for comfort, 2 for running in highway conditions).

    3. Adjust the machine geometry (angles – especially convergence, but also drop and escape angles), after approx. 500-1000 km from suspension installation!


CTA-Comanda


Pedders suspension complete set +4cm (firm)

    • Compatible with Dacia Duster 4×4 2010+, 1.5 diesel and 2.0 petrol. Compatible with 1.6 petrol only if the car has a front weight, eg: winch, metal bar!
    • Suspension set consisting of 4 shock absorbers, 4 springs and adjusting screws, suitable for off-road, towing and additional loading (metal bumpers, winch, metal shields, etc.)
    • Provides a lift of approx. 4 cm from the standard suspension of the car.
    • The shock absorbers have a robust construction with a larger body diameter and 3 cm longer strut, with dust protection.

    Please keep in mind the following recommendations in order to enjoy a long time and in the best possible conditions of your suspension:

    1. Periodically check the condition of the shock absorber rods on each machine revision (we recommend that you check for each periodic maintenance operation such as oil changes and filters). If they show cracks, cuts, gaps between the sleeve and the shock absorber, we recommend that you replace them as soon as possible. If they are not in good condition (they have cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers will suffer damage, this type of defect not being the subject of the warranty.

    2. Periodically check the tire pressure! We recommend that it be between 1.8 and 2 (1.8 for comfort, 2 for running in highway conditions).

    3. Adjust the machine geometry (angles – especially convergence, but also drop and escape angles), after approx. 500-1000 km from suspension installation!


CTA-Comanda


Follow us: